Even with the best care, your BbTalkin microphones and speakers can wear out over time — especially when used regularly in harsh environments like saltwater, sun, and wind. We offer repair and replacement options to keep your communication system performing like new. Regular renewal ensures optimal sound quality and longer system life. To keep your BbTalkin system performing at its best, we recommend replacing your microphone and speaker every year. Because they are one of the most delicate parts of the headset, we designed them for easy replacement. Replacing it is simple and can easily be done at home.
Pro Tips
- Replace your microphone and speaker annually for best performance.
- Always rinse your headset with fresh water after use and dry it in a ventilated place.
- Avoid overtightening screws during repairs.
- Keep a spare SD-MIC and SD-SPK on hand if you use your BbTalkin system frequently.
Common Issues
Some of the most common issues we see include:
- Reduced or distorted sound quality
- Intermittent microphone connection
- No sound in one or both earpieces
- Corrosion or water inside connectors
- Damaged wiring or cracked housing
If you experience any of these problems, don’t worry — most can be repaired or replaced quickly. You can do this yourself. Or send the product to use for inspection and repair.
You can find the replacement SD-SPK speaker component here
You can find the replacement SD-MIC Microphone component here
Repair or Replace?
Depending on the condition, you can inspect your headset and determine whether it’s more effective to repair or replace the part. In most cases you are able repair the headset by replacing the microphone or speaker.
Damages like heavily corroded or waterlogged units, damage to connectors and/or cables are usually damages that are not repairable and need to be replaced.
How to check your headset
You’ll need two working intercoms for this process and pair them together:
- Intercom #1: To listen and test sound output. Use working headset.
- Intercom #2: Connected to the headset with the microphone or speaker to be replaced.
Check speaker connections:
- Carefully detach the old, broken microphone from the headset.
- You’ll see two small connection pins where the microphone was installed.
- Use a paper clip to connect the two pins together briefly
- If you hear a scratching or static sound through intercom #1, it means the headset is still functioning correctly.
- If there’s no sound at all, the headset may be beyond repair.
📌 If you don’t feel comfortable testing and/or replacing the microphones and speakers. You can always request a repair.
How to Request a Repair
If you prefer, you can also send your headset to us for a free inspection and repair service. You will only pay for the return shipment and replacement parts. Standard repair service applies to all products (only) purchased at Bb-Talkin.eu.
- Contact us with your product type, order number regarding product, issue, and (if possible) a few photos
- We’ll reply with instructions
- If asked. Send your unit to our service address or use provided label if possible
- Once inspected, we’ll confirm the repair cost and time frame before proceeding.
- Do not send without contacting us.
Typical repair turnaround time is 5–10 working days, depending on parts availability.
DIY - Speaker Replacement Guide (SD-SPK)
You can find the replacement SD-SPK speaker component here: [link to product page].
We recommend to attach the intercoms and listen to the sound when microphone is aligned sound immediately will be heard.
Install the replacement SD-SPK speaker component yourself following the steps below:
Step 1
If applicable, remove the Velcro and then take out the speaker screws.
Step 2
If applicable, remove the Velcro and then take out the speaker screws.
Step 3
A) Use plastic tool to hook and take speaker out
B) Lift speaker do not damage edge
C) Disconnect wire
Step 4
Stick back Velcro (not obligated)
DIY. Microphone Replacement Guide (SD-MIC)
You can find the replacement SD-MIC Microphone component here
We recommend to attach the intercoms and listen to the sound when microphone is aligned sound immediately will be heard.
Install the replacement SD-MIC microphone component yourself following the steps below:
Step 1
A) Take off velcro
B) Take off foam
Step 2
A) Do not damage edge
Take out the microphone screws and take out the microphone
Step 3
A) Align mic with pins.
Make sure the red rubber ring around the connector is barely visible. The less visible, the better the seal.
Step 4
A) Raised part is normal
While holding pressure, insert and tighten the two screws evenly on both sides. Once both screws are secure, release the pressure.
⚠️ We recommend to attach the intercoms and listen to the sound when microphone is aligned sound immediately will be heard.
- Take of the Velcro and foam that covers the microphone
- Take out the microphone screws and take out the microphone (do not damage edge of headset, don’t use sharp tool)
- Align the new SD-MIC above the two pins. Gently push down using your thumb. Make sure the red rubber ring around the connector is barely visible. The less visible, the better the seal.
- While holding pressure, insert and tighten the two screws evenly on both sides. Once both screws are secure, release the pressure.
Do not overtighten the screws. This prevents cracking near the screw holes. A raised part is normal
Frequently asked questions about BbTalkin Microphone & Speaker Repair
How do I know if my BbTalkin microphone or speaker needs replacing?
If you hear crackling, distortion, weak audio, or one side stops working, the microphone or speaker is likely worn out. These components naturally degrade over time, especially with saltwater exposure, and riders typically replace them yearly to maintain clear communication.
Can I repair my BbTalkin headset myself?
Yes. All BbTalkin headsets use modular components, so you can easily swap the SD-MIC or SD-SPK at home with a small screwdriver. The design is meant for quick DIY repair, supported by detailed step-by-step video guides.
Where can I buy genuine BbTalkin replacement parts?
Always purchase from bb-talkin.eu or an authorised BbTalkin EU reseller. This ensures correct waterproof sealing and full compatibility. Look specifically for part codes SD-MIC (microphone) and SD-SPK (speaker).
What if I’m not comfortable doing the repair?
You can send your headset to BbTalkin Europe for a free inspection. Our team will test the unit and repair or replace components as needed. You only pay for return shipping and any replacement parts used.
How long does a BbTalkin headset repair take?
Most repairs take 5–10 working days, depending on parts availability. Once inspection is complete, you will receive an update and confirmation before the unit is shipped back.
