Learn how to pair your BbTalkin 3.0 intercoms for clear, hands-free communication in any setup.
This step-by-step guide covers 2-way, 3-way, and 4-way pairing between STANDARD and MASTER units, including how to reconnect, mute, and reset your devices. Follow these instructions to achieve the best range, connection stability, and audio clarity during every session.
2-Way Communication: STANDARD + STANDARD
Power On:
Press and hold the POWER until LED is flashing blue
Pairing Mode:
Press and hold INTERCALL on both devices, until LED is quickly flashing red
Begin Pairing:
Click either one of device’s INTERCALL once quickly, the
devices are finding each other
When the devices are paired, you will hear “connected” on your headset
⚠️ NOTICE:
- Once paired, your devices will memorize the pairing. Do not go through
pairing process again. - For everyday use, quickly click either one of the devices INTERCAL button after you have powered your device on.
How to use 2-way communication
How to connect and disconnect:
You can easily connect or disconnect your Standard devices by quickly pressing the INTERCALL button
pressing either device’ s INTERCALL button once.
How to mute:
Click the MUTE once to turn on/off the microphone.
How to reset:
While OFF, press and hold (3sec) the POWER button and Vol+ button AT THE SAME TIME, until purple LED light flashes
3-Way Communication: STANDARD + STANDARD + MASTER
⚠️You need a MASTER device to communicate with more than two people.
PAIRING 1st STANDARD
Power on:
Press and hold the CH2 button on the MASTER and POWER button on the STANDARD until LED is on
Pairing mode MASTER CH1:
Press and hold CH1 until red LED is quickly flashing
Pairing mode 1st STANDARD:
Press and hold INTERCALL until red LED is quickly flashing
Begin pairing CH1:
Click the MASTER CH1 once quickly, the devices are finding each other
⚠️ Do not click STANDARD INTERCALL
When the devices are paired, you will hear “connected” on your headset
PAIRING 2st STANDARD
⚠️NOTICE: Pairing to MASTER CH2 is a different process and described below at 4-way communication.
Power On:
Press and hold the CH2 button on the MASTER and POWER button on the STANDARD until LED is on
Pairing mode MASTER CH3:
Press and hold CH3 until red LED is quickly flashing
Pairing mode 2st STANDARD:
Press and hold INTERCALL until red LED is quickly flashing
Begin pairing CH3:
Click the MASTER CH3 once quickly, the devices are finding each other
⚠️ Do not click STANDARD INTERCALL
When the devices are paired, you will hear “connected” on your headset
⚠️ NOTICE:
- Once your devices are paired, they remember each other. Do not go through
the pairing process again. - For everyday use, once the devices are turned on, to connect, quickly press the MASTER CH button once for the STANDARD device you wish to connect.
- It is highly recommended that the STANDARD devices be numbered according to the CH they are paired to.
How to use 3-way communication
How to connect and disconnect:
You can easily connect or disconnect your Standard devices by quickly pressing the MASTER CH button once for the STANDARD device you wish to connect.
⚠️ Do not press CH1 and CH3 AT THE SAME TIME. After CH2 is connected, you can call out CH3
How to mute:
Press the Vol+ and Vol- button once AT THE SAME TIME to turn on/off the microphone.
How to reset:
While OFF, press and hold (3sec) the POWER button and Vol+ button AT THE SAME TIME, until purple LED light flashes
4-WAY COMMUNICATION: STANDARD + STANDARD + STANDARD + MASTER
⚠️You need a MASTER device to communicate with more than two people. First follow the 3-WAY COMMUNICATION SETUP.
Pairing 3rd Standard
Power on:
Press and hold the POWER button on the STANDARD until LED is on.
⚠️ Do not turn on the MASTER. Turn it off if needed.
Pairing mode MASTER:
While OFF, press and hold (5sec.) MASTER CH2 until LED is quickly flashing red.
Pairing mode 3rd STANDARD:
Press and hold INTERCALL until red LED is quickly flashing
Begin pairing:
Click the MASTER CH2 once quickly, the devices are finding each other
⚠️ Do not click STANDARD INTERCALL
When the devices are paired, you will hear “connected” on your headset
⚠️ Notice:
- Once your devices are paired, they remember each other. Do not go through
the pairing process again. - For everyday use, once the devices are turned on, to connect, quickly press the MASTER CH button once for the STANDARD device you wish to connect.
- It is highly recommended that the STANDARD devices be numbered according to the CH they are paired to.
How to use 4-way communication
How to connect and disconnect:
You can easily connect or disconnect your Standard devices by quickly pressing the MASTER CH button once for the STANDARD device you wish to connect.
⚠️ Do not press CH1 and CH3 AT THE SAME TIME. After CH2 is connected, you can call out CH3
How to mute:
Press the Vol+ and Vol- button once AT THE SAME TIME to turn on/off the microphone.
How to reset:
While OFF, press and hold (3sec) the POWER button and Vol+ button AT THE SAME TIME, until purple LED light flashes
How to pair with your smartphone
⚠️ STANDARD device only. MASTER cannot pair phone
Power on:
While the unit is OFF, press and hold the POWER until LED blue & red flashes
Enable Bluetooth on phone:
Enable mobile phone’s Bluetooth search mode.
Select “bb30” on the screen.
Once you see the LED slowly flashing blue, pairing to your device is complete
How to use:
Pick up/Hang up the phone call: Click POWER once
Decline a call/Redial:
Click POWER twice quickly
MUSIC PLAY:
Play/Pause music: Click POWER once
Forward/Backward:
Press and hold 2sec. Vol+ for forward and Vol- for backward
How to pair with your GoPro Hero 12
⚠️ STANDARD device only. MASTER cannot pair phone
Power on:
While the unit is OFF, press and hold the POWER until LED blue & red flashes
Enable Bluetooth on phone:
Enable mobile phone’s Bluetooth search mode.
Select “bb30” on the screen.
Once you see the LED slowly flashing blue, pairing to your device is complete
Connection options:
You can use your voice control.
2-way:
After connecting GoPro you can connect the STANDARD to another STANDARD
3-way:
After connecting GoPro you can connect the STANDARD to another MASTER with a second STANDARD
⚠️ Notice:
- Once your devices are paired, they remember each other. Do not go through
the pairing process again. - Make sure QuickCapture is OFF. Do NOT use quick capture.
- Remember the GoPro will always automatically pair again unless links is disconnected
Frequently asked questions for pairing your BbTalkin intercoms
How do I pair two BbTalkin Standard 3.0 units?
Turn on both intercoms, hold INTERCALL until the red LED flashes, then click INTERCALL once on either unit.
You’ll hear “Connected.”
After the first setup, they’ll auto-reconnect when powered on.
Why won’t my BbTalkin 3.0 units connect?
Check that both devices are the same model (Standard 3.0 ↔ Standard 3.0, or Standard ↔ Master 3.0).
If LEDs don’t flash red, perform a reset by holding CH2 + Vol + for three seconds while powered off, then retry pairing.
How do I add a third or fourth intercom to my BbTalkin network?
Use a Master 3.0 to expand your setup.
Pair Standards to the Master using CH1, CH2, and CH3 channels - one for each additional user. The Master manages all live group connections.
Can I pair my BbTalkin with a smartphone or GoPro?
Yes - only the Standard 3.0 can connect to phones and GoPro Hero 12. Hold Power until the LED flashes blue + red, then select “bb30” in your Bluetooth list. When the LED turns slow-blue, pairing is complete.
Do I need to pair my devices every time I use them?
No. Once your BbTalkin 3.0 intercoms are paired, they automatically reconnect when powered on. If you reset or change devices, simply re-pair using the same steps.
How do I reset my BbTalkin 3.0 intercom to factory settings?
Turn the unit off, then hold CH2 + Vol + together for 3 seconds until the LED flashes purple. This clears all previous pairings and restores factory default mode.
